IT IS SUITABLE FOR THE PRODUCTS BELOW:
1. PC Finished Plastic Products
2. PC Lampshade
3. PC Sheet
4. PC Auto Parts
1. PC Finished Plastic Products
2. PC Lampshade
3. PC Sheet
4. PC Auto Parts
It is suitable for PC film,blow, and injection Grade granules to make their finished products have a good impact strength, helping the PC products successfully pass the proper hit, crash, or impact test.
standard | unit | data | |
---|---|---|---|
Exterior | --- | --- | transparent particle |
Smell | --- | --- | Faint Smell |
Density | ASTM D792 | g/cm3 | 0.89 |
Shore hardness | ASTM D792 | A | 65 |
The melt flow rate | ASTM D1238 | g/10min | 9.76 |
Tensile Strength | ASTM D412 | MPa | 4.04 |
Elongation at break | ASTM D412 | % | 313 |
|
Please read on, stay posted, subscribe, and we welcome you to tell us what you think.
Scan to wechat :